Sublimation Blog

Sublimation Tumblers: Frosted Glass vs Stainless Steel Guide

13oz Frosted Glass Sublimation Tumbler with Bamboo Lid

Sublimation tumblers are polymer-coated drinkware blanks made to take a dye sublimation print. The two most popular types are frosted glass and stainless steel. Frosted glass gives a soft, see-through look for cold drinks. Stainless steel is tougher, takes bright, crisp colour and suits drinks on the go. Both are printed in the same basic way: wrap the design, apply heat and pressure, then let the blank cool. This guide sets out the differences and how to get a good print on each.

What makes a tumbler suitable for sublimation?

Sublimation ink only bonds with polyester or a polymer coating. When it is heated, the ink turns to gas and enters the coating, then sets as it cools. An ordinary glass or steel cup has no coating, so the ink would simply wipe off. That is why you need tumblers sold specifically as sublimation blanks. Their coating is applied at the factory, ready for printing.

Because the coating holds the image, the background colour matters. Sublimation inks are transparent, so they show best on white or light surfaces. They do not print white, and any white areas in your design will show the colour of the tumbler underneath.

Frosted glass sublimation tumblers

Frosted glass tumblers have a matte, slightly translucent finish. A printed design sits on the frosted surface and lets light through, giving a softer, more delicate look than a solid white blank. They are a favourite for iced coffee, smoothies and summer gift sets.

Why choose frosted glass

  • Distinctive look: the translucent finish suits botanical designs, line art, names and monograms.
  • Shows off the drink: colourful drinks show through the unprinted areas.
  • Gift appeal: paired with a bamboo lid, they look polished and natural.

Things to bear in mind

  • Glass is more fragile than steel, so handle it carefully during and after pressing.
  • Colours look softer on frosted glass than on a solid white coating. Choose bold designs if you want strong contrast.
  • Glass is not insulated, so it is best for cold drinks rather than keeping drinks hot.

If you want to try glass, the 13oz Frosted Glass Sublimation Tumbler with Bamboo Lid is a handy everyday size. The 18oz Frosted Glass Sublimation Tumbler with Bamboo Lid gives you more room for larger wrap-around designs and bigger drinks.

Stainless steel sublimation tumblers

Stainless steel tumblers have a solid white coating over a metal body. On white, sublimation colours come out vivid and sharp, so photos, gradients and detailed artwork look their best. Steel tumblers are usually double-walled, which helps keep drinks hot or cold for longer. Check the product details for the blank you buy.

Why choose stainless steel

  • Durability: steel copes much better with bumps and drops than glass, so it suits commuters, gyms and kids' teams.
  • Vivid prints: the white coating shows the full brightness of sublimation inks.
  • Hot or cold: a double-walled build makes it practical all year round.

Things to bear in mind

  • Steel holds heat after pressing, so always handle it with heat resistant gloves.
  • A straight-sided steel tumbler is easiest to wrap evenly. Tapered shapes need more care to avoid a skewed print.

The 20oz (600ml) Stainless Steel Sublimation Tumbler is a popular choice for full-wrap designs and personalised gifts.

Glass vs steel sublimation tumblers at a glance

  • Look: glass is soft and translucent; steel is bright and opaque.
  • Best for: glass suits cold drinks and gift sets; steel suits travel and everyday use.
  • Toughness: steel is the more robust option.
  • Design style: glass flatters simple, bold artwork; steel handles photos and fine detail.

How to print sublimation tumblers

The method is similar for glass and steel. Always check the recommended time and temperature for your specific blank and your equipment, as settings vary between tumbler presses, convection ovens and shrink wrap methods.

  1. Measure the tumbler. Measure the height of the printable area and the circumference. Size your design to fit, leaving a small gap at the seam if you don't want an overlap.
  2. Mirror and print. Mirror your design and print it onto sublimation paper using sublimation ink.
  3. Clean the surface. Wipe the tumbler with a lint-free cloth to remove dust and fingerprints, which can cause marks in the print.
  4. Wrap tightly. Wrap the paper around the tumbler, printed side facing in, and pull it snug. Secure it with heat-resistant tape such as Sublimation Heat Tape - 10mm. Any gaps between paper and coating can lead to blurry or faded areas, sometimes called ghosting.
  5. Apply heat and pressure. Press or bake the tumbler using the recommended settings. With a tumbler press, make sure the element closes evenly around the whole wrap.
  6. Remove and cool. Wearing gloves, take off the paper straight away to avoid ghosting, then let the tumbler cool fully before handling it normally.

Common printing problems

  • Faded or patchy areas: often caused by a loose wrap or uneven pressure. Re-tape tighter and check your press.
  • Blurred edges: usually the paper shifted. Use more tape and remove the paper promptly.
  • Dull colours on glass: this is partly the nature of frosted glass. Increase contrast in your design rather than over-heating.

Caring for printed tumblers

To keep prints looking good for longer, hand wash sublimation tumblers with a soft sponge and avoid abrasive scourers. Wooden and bamboo lids should be kept out of soaking water and dried promptly. Pass these care tips on to your customers too.

Which sublimation tumbler should you choose?

Choose frosted glass when you want a stylish, light-catching finish for cold drinks and gifts. Choose stainless steel when you need durability, bright colour and a tumbler that can go anywhere. Many crafters stock both, so customers can pick the style that suits them.

Ready to start printing? Browse the frosted glass and stainless steel tumblers at Dye Sublimation Store, along with the tape, paper and gloves you need for a clean, professional finish.